Maintenance free High Strength Fiberglass will not bleach, fade or crack Outboard Swim Platform with Telescoping Ladder Ladder and rail:stainless steel 304 Two-Step Telescoping Ladder

High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with antifouling bottom paints or other 1- and 2-part paints Provides superior corrosion protection on all underwater metals Fast drying, with no sanding needed between coats For use above and below the waterline Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200

DURABLE, PROTECTIVE MARINE GRADE WOOD FINISH has a unique linseed oil & resin formula with maximum UV protection; use above the waterline to finish & seal teak, mahogany & other wood on your boat; prevents fading and UV damage; for interior and exterior use VERSATILE FINISH FOR WOOD is also ideal for DIY home use on outdoor teak furniture, front entry doors, patio chairs and tables, indoor wood stairs, handrails, trim and more; the flexible, breathable finish provides superior all-weather protection EASY TO APPLY, NO SANDING BETWEEN COATS: Apply 2-3 coats by brush or roller to clean, dry wood; covers easily and penetrates deeply to showcase the wood grain; easier than applying marine varnish because there's no need to sand between coats CHOOSE NATURAL TEAK, SATIN OR GLOSS FINISH: The natural teak finish is ideal for teak and other dark hardwoods; the gloss finish can be used alone or applied over the teak or satin finishes to get the look of varnish - without the extra effort and expense AVAILABLE IN QUART SIZE in Natural Teak, Gloss, or Satin; THINNING: Not necessary, but if desired, thin up to 50% with mineral spirits for the first coat; COVERAGE: 80-100 sq ft per quart; DRY TO OVERCOAT: 16 hrs @ 90°F; 24 hrs @ 70°F; 36 hrs @ 50°F

Doesn'T hinder rod use when applied Keeps rod afloat when dropped in the water Slips easily on your rod and secures with hook and loop straps Corrosion Resistant

TOUGH MARINE PAINT: Durable, one-part polyurethane formula adheres directly to aluminum and galvanized metal. No need to etch or prime first; prevents corrosion and resists UV damage, chemicals and abrasion ATTRACTIVE LOW-SHEEN FINISH: Ideal for aluminum canoes, dinghies, pontoon, hunting, and fishing boats, jon boats, duck boats, hunting blinds, tree stands, ladders, boat trailers and more. Easy to create a camouflage finish for hunting EASY TO APPLY AND DRIES FAST: Apply 2-3 coats by brushing, rolling or spraying. Overcoat in just 1 hour at 72 F, without sanding between coats. Get superior adhesion to prepared aluminum without priming ENVIRONMENTALLY FRIENDLY ALUMINUM PAINT formula is chromate-free, has low VOCs, low odor, and easy soap & water cleanup. Thin up 20% with water. Finish won't peel, chip, or fade AVAILABLE IN EARTH BROWN, KHAKI, BLACK, WHITE, LIGHT GRAY AND ARMY GREEN (similar to olive drab green paint); Sizes: Quart and Gallon; Coverage: 80-100 sq ft/qt; 320-400 sq ft/gal; Use above or below the waterline (note: is not an antifouling paint)