electronics

Top5: Boat renting kenora | Evaluation

  • Star Brite Waterproofing Spray, Waterproofer + Stain Repellent + UV Protection, 128 oz
    Waterproofing + UV & stain protection for boat covers, car covers, bimini tops, sail covers, tents, jackets, backpacks, boots, awnings & patio covers Does not change the breathabilty, color, or feel of fabric Great for use on new fabrics, greatly extending their service life by providing an additional barrier to moisture and damaging UV rays 1 Gallon - 465 square feet of coverage (Coverage may vary slightly depending upon amount of product applied per square foot) 22 oz covers – 80 square feet coverage (* Coverage may vary slightly depending upon amount of product applied per square foot) Made with pride in the United States NOTE: Star brite Waterproofing is ready to use at full strength for best results. If dilution is required, use mineral spirits. Cutting with denatured alcohol will cause clumping and adverse affects
  • Rejuvenate All Floors Restorer and Polish Fills in Scratches Protects & Restores Shine No Sanding Required (32 oz)
    Fills In Scratches And Restores Shine To Wood Floors And All Flooring Types Works On Hardwood, Laminate, Vinyl, Tile, Linoleum, Terracotta And More | Made In USA Easy Mop-On Application Provides Up To 50% More Traction | Dries In 45 Minutes And Lasts For Months This Low VOC Floor Restorer is Perfect For Kitchen, Bathroom, Laundry And Hallway Floors Perfect For Residential And Commercial Use Including Homes, Dorms And Apartments
  • 3M Marine Restorer & Wax (09006) – For Boats and RVs – 33.8 Ounces
    Removes heavy oxidation Polishes to restore shine and color Unique formula combines rubbing compound and wax Recommended for boats and RVs
  • TotalBoat Marine Gelcoat for Boat Building, Repair and Composite Coatings (White, Quart with Wax)
    PREMIUM MARINE-GRADE POLYESTER GELCOAT: More durable than standard orthophthalic gelcoat, this is the smart choice for cosmetic gelcoat repair, hull coatings, boat building, layups and exterior coatings for composite parts on boats, motorcycles, RVs & more IDEAL FOR COSMETIC REPAIRS, EASY TO TINT with a polyester resin or gelcoat coloring agent to color match your existing gelcoat; tint white gelcoat to get pastel colors; tint neutral gelcoat for dark, bold colors. Add colorants before adding MEKP catalyst EASY ONE-STEP APPLICATION USING A BRUSH, ROLLER OR SPRAY GUN: Non-sagging, high-viscosity formula is easy to apply and has great coverage. At 77°F, pot life is 8-12 minutes. Cured gelcoat is easy to sand, buff and polish to a high-gloss, showroom finish CHOOSE THE RIGHT GELCOAT FOR YOUR PROJECT: For polyester resin layups, use gelcoat without wax as the first coat inside a prepared mold; as a final coat, use gelcoat with wax (the wax makes the gelcoat dry tack-free); if needed, thin with styrene only AVAILABLE IN WHITE OR NEUTRAL, WITH OR WITHOUT WAX. White gelcoat comes in Quart and Gallon sizes; Neutral gelcoat comes in Quart size ONLY. Includes MEKP catalyst. Coverage: About 12.8 sq ft/gal at 1/8" thick, 25.7 sq ft at 1/16", 51.3 sq ft at 1/32"
    32.99 $
  • Meguiar’s M5916 Marine/RV Quik Wax Clean & Protect, 16 Fluid Ounces
    Quickly add protection and gloss to large surfaces typical on boats and RVs Wet or dry, this specialized formulation will create a brilliant gloss while adding wax protection Suitable for use on fiberglass, painted surfaces, stainless steel and clear plastics 16 oz. bottle Fit Type: Universal
    9.86 $
  • Meguiar's M4516 Marine/RV Polish & Gloss Enhancer - 16 oz.
    Restores brilliant gloss on fiberglass and painted marine or RV surfaces after cleaning Restores valuable oils to feed and nourish the fiberglass or painted surfaces Especially effective on dark colors Use after the surface has been cleaned and restored to a “like new” or “average” finish 16 oz. bottle
    13.99 $
  • TotalBoat Aluminum Boat Barrier Coat (Gallon, Gray)
    High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with antifouling bottom paints or other 1- and 2-part paints Provides superior corrosion protection on all underwater metals Fast drying, with no sanding needed between coats For use above and below the waterline Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200
    94.99 $
  • Lifetime 60059 Black Bottom & Desert (Tan) Sides and Lid Outdoor Storage Box-80 Gal, 80 Gallon, Desert Sand
    Rigid Dual-Wall High-Density Polyethylene (HDPE) Construction | Rust-Resistant Stainless Steel Hardware Product dimensions | External – 39” L x 24” W x 26” H | Internal – 36” L x 22.5” W x 23.8” H | Capacity – 80 gallons / 10.7 ft³ | Weight – 37.2 lbs. | Diagonal length (across box) – 41.7” Lockable Lid (Lock Not Included) | Easy Straight-Forward Assembly Weather-resistant Build to Withstand the Elements | Can sit over any type of surface Controlled Spring-Hinge Lid Opens Greater than 90° – Won’t Slam Shut | Can be used as a bench
    129.99 $
  • TotalBoat Marine Wood Finish - Ideal for Boats, Home and Outdoor Teak Furniture (Satin, Quart)
    DURABLE, PROTECTIVE MARINE GRADE WOOD FINISH has a unique linseed oil & resin formula with maximum UV protection; use above the waterline to finish & seal teak, mahogany & other wood on your boat; prevents fading and UV damage; for interior and exterior use VERSATILE FINISH FOR WOOD is also ideal for DIY home use on outdoor teak furniture, front entry doors, patio chairs and tables, indoor wood stairs, handrails, trim and more; the flexible, breathable finish provides superior all-weather protection EASY TO APPLY, NO SANDING BETWEEN COATS: Apply 2-3 coats by brush or roller to clean, dry wood; covers easily and penetrates deeply to showcase the wood grain; easier than applying marine varnish because there's no need to sand between coats CHOOSE NATURAL TEAK, SATIN OR GLOSS FINISH: The natural teak finish is ideal for teak and other dark hardwoods; the gloss finish can be used alone or applied over the teak or satin finishes to get the look of varnish - without the extra effort and expense AVAILABLE IN QUART SIZE in Natural Teak, Gloss, or Satin; THINNING: Not necessary, but if desired, thin up to 50% with mineral spirits for the first coat; COVERAGE: 80-100 sq ft per quart; DRY TO OVERCOAT: 16 hrs @ 90°F; 24 hrs @ 70°F; 36 hrs @ 50°F
  • PPG ProLuxe Door & Window Wood Finish, 1 Gallon, 003 Clear Satin
    Type: Clear Sheen: Gloss and Satin Description: Alkyd high solids formulation. Usage: Doors, Windows, Garage and Fiberglass Doors. High Solids Alkyd formulation, Excellent microporosity and flexibility.