cleaning

Last minute: Boat renting hvar | Customer Evaluation

  • Camco Boat Dual Water Feed Motor Flusher - Flushes Contaminates Out of Your Boat Engine | Dual Input Design | Connects to Standard Water Hoses |Great for Winterization - (50141)
    Flushes contaminates out of the engine Dual input design enables better flow through the engine Connects to any standard garden hose Compatible with most outboards and sterndrives Great for boat winterization
  • Extreme Max 3006.7384 BoatTector Fender Value 4-Pack - 6.5" x 22”, Black
    Includes four 6. 5” x 22” BoatTector fenders and four 3/8” x 5' fender lines Equipped with a needle valve to inflate or deflate each fender to a desired pressure (needle valve pump not included) Reinforced molded eyelets ensure longevity and strength UV stabilized, chemically resistant Two-year limited
  • Attwood 66553-3 Boat Self-Bailing Cockpit Barbed Stainless Steel 1 ½-Inch Scupper Valve, One size
    Package length: 7.7 cm Package width: 14.6 cm Package height: 28.9 cm Product Type: FISHING EQUIPMENT
  • Perko 1319DPGBLK Polymer Vented Straight Neck Gas Fill for 1.5" Hose - Black
    Black polymer construction No ground wire required Easy installation Built with quality materials
    23.48 $ 27.90 $ -16%
  • attwood 11840-7 Universal 10-Micron Fuel/Water Separator for 2-Cycle and 4-Cycle Engines, One Size
    Double seal for enhanced performance Outfitted with 2 brass plugs for secure connections and universal 3/8 inch ports 10 micron replacement capability; replaces Mercury 35-60494A4 Fits all 2 and 4 cycle engines with 10 micron filter Attwood products are both compatible and reliable, engineered and built with a never-fail attitude Sport type: Boating
    32.87 $
  • Amarine Made Boat Out-Board Swim High Strength Fiberglass Platform with 2-Steps Ladder
    Maintenance free High Strength Fiberglass will not bleach, fade or crack Outboard Swim Platform with Telescoping Ladder Ladder and rail:stainless steel 304 Two-Step Telescoping Ladder
    124.80 $
  • TotalBoat Aluminum Boat Barrier Coat (Gallon, Gray)
    High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with antifouling bottom paints or other 1- and 2-part paints Provides superior corrosion protection on all underwater metals Fast drying, with no sanding needed between coats For use above and below the waterline Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200
    94.99 $
  • TotalBoat Marine Wood Finish - Ideal for Boats, Home and Outdoor Teak Furniture (Satin, Quart)
    DURABLE, PROTECTIVE MARINE GRADE WOOD FINISH has a unique linseed oil & resin formula with maximum UV protection; use above the waterline to finish & seal teak, mahogany & other wood on your boat; prevents fading and UV damage; for interior and exterior use VERSATILE FINISH FOR WOOD is also ideal for DIY home use on outdoor teak furniture, front entry doors, patio chairs and tables, indoor wood stairs, handrails, trim and more; the flexible, breathable finish provides superior all-weather protection EASY TO APPLY, NO SANDING BETWEEN COATS: Apply 2-3 coats by brush or roller to clean, dry wood; covers easily and penetrates deeply to showcase the wood grain; easier than applying marine varnish because there's no need to sand between coats CHOOSE NATURAL TEAK, SATIN OR GLOSS FINISH: The natural teak finish is ideal for teak and other dark hardwoods; the gloss finish can be used alone or applied over the teak or satin finishes to get the look of varnish - without the extra effort and expense AVAILABLE IN QUART SIZE in Natural Teak, Gloss, or Satin; THINNING: Not necessary, but if desired, thin up to 50% with mineral spirits for the first coat; COVERAGE: 80-100 sq ft per quart; DRY TO OVERCOAT: 16 hrs @ 90°F; 24 hrs @ 70°F; 36 hrs @ 50°F
    34.99 $
  • attwood 11217-1 Heavy Duty Boat Trailer Roller, Rubber Shaft Keel, Black, 12-Inch x 5/8-Inch
    Non-marring, durable rubber protects your boat’s finish Molded rubber over steel tube with nylon end inserts Extremely tough, designed specifically for heavier boats Inward taper and “V”-cut eases handling of larger vessels Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
  • TotalBoat Aluminum Boat Paint for Canoes, Bass Boats, Dinghies, Duck Boats, Jon Boats and Pontoons (Black, Gallon)
    TOUGH MARINE PAINT: Durable, one-part polyurethane formula adheres directly to aluminum and galvanized metal. No need to etch or prime first; prevents corrosion and resists UV damage, chemicals and abrasion ATTRACTIVE LOW-SHEEN FINISH: Ideal for aluminum canoes, dinghies, pontoon, hunting, and fishing boats, jon boats, duck boats, hunting blinds, tree stands, ladders, boat trailers and more. Easy to create a camouflage finish for hunting EASY TO APPLY AND DRIES FAST: Apply 2-3 coats by brushing, rolling or spraying. Overcoat in just 1 hour at 72 F, without sanding between coats. Get superior adhesion to prepared aluminum without priming ENVIRONMENTALLY FRIENDLY ALUMINUM PAINT formula is chromate-free, has low VOCs, low odor, and easy soap & water cleanup. Thin up 20% with water. Finish won't peel, chip, or fade AVAILABLE IN EARTH BROWN, KHAKI, BLACK, WHITE, LIGHT GRAY AND ARMY GREEN (similar to olive drab green paint); Sizes: Quart and Gallon; Coverage: 80-100 sq ft/qt; 320-400 sq ft/gal; Use above or below the waterline (note: is not an antifouling paint)