Croatia-Cruise-5e903de0bb788

  • Pentek - 455905-43 FloPlus-10BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 0.5 Micron
    Reduces fine sediment, chlorine taste and odor, and protozoan cysts in high-flow residential and commercial drinking water applications Nominal filtration rating of 0.5 micron Modified bonded PAC media combines efficient cyst reduction with the high flow rate of a 10-micron filter Initial pressure drop of 4 psi at a flow rate of 2 gpm Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
  • Blue Sea Systems 8082 PANEL DC 10 POS W/VOLT & AMTR DC 10 Position, 5-1/4" W x 11-1/2" H
    All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks Accepts Blue Sea Systems" Large Format Panel label
  • Pentek R50-BB Pleated Filter (9-3/4" x 4-1/2"), 50 Micron
    Basic sediment reduction Reusable to extend cartridge life Nominal filtration rating of 50 micron Fits most standard 10-inch Big Blue housings Flow rates up to 10 gallons per minute Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
  • A.O. Smith ST1102 1 HP, 3450 RPM, 1.5 Service Factor, 56J Frame, Capacitor Start, ODP Enclosure, C-Face Pool Motor
    Made in United States Package length : 19. 0" Package width : 9. 5" Package height : 9. 5" Power Source Type: Wood Pellet
    205.14 $
  • Pentek CBC-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 0.5 Micron
    Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water Nominal filtration rating of 0.5 micron Bonded PAC media with polyolefin wraps and polyethylene netting Initial pressure drop of 4.6 psi at a flow rate of 2 gpm Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
    43.56 $ 51.05 $ -15%
  • Pentek - 355212-43 WP.5BB97P String-Wound Polypropylene Filter Cartridge, 10" x 4.5", 0.5 Micron
    Reduces sand, silt, scale, and rust particles in residential and municipal drinking water and industrial fluid applications Nominal filtration rating of 0.5 micron Polypropylene cord precisely wound on a rigid polypropylene core for high dirt-loading capacity Initial pressure drop of 5 psi at a flow rate of 10 gpm Temperature range of 40 to 165 degrees F (4.4 to 74 degrees C)
    19.89 $
  • Century USQ1072 3/4 HP, 13.4/6.7 Amps, 1.3 Service Factor, 48Y Frame, Capacitor Start, ODP Enclosure, Square Flange Pool Motor (Formerly A.O. Smith)
    3/4 Hp 3450 Rpm 115/230 Volts Country Of Origin: China
    159.99 $
  • A.O. Smith ST1072 3/4 HP, 3450 RPM, 1.5 Service Factor, 56J Frame, Capacitor Start, ODP Enclosure, C-Face Pool Motor
    Manufacturer: CENTURY Country of manufacture: Mexico Mechanical Motors 3/4 HP 3450 RPM 115/230 volts 3/4 HP 3450 RPM 115/230 volts
    162.95 $
  • Pentek - 155548-43 EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns
    Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water Nominal filtration rating of 5 microns Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life Initial pressure drop of 4.3 psi at a flow rate of 2 gpm Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
  • Tier1 Replacement for Dynamic 03FIL1300, 817-3501, R173431, PRB35-IN, Filbur FC-2385, Unicel C-4335 Pool and Spa Filter for Dynamic Series systems (2-Pack)
    AFFORDABLE REPLACEMENT: Replacement PRB35-IN-3 Spa filter for 35 sq ft Dynamic series systems and any systems that need 5 inch (Outside diameter) by 9 1/4 inch (Length) filters INCREDIBLY SIMPLE TO USE: Easily replace your old C-4335, PRB35-IN, FC 2385 with the Tier1 R173431 EXTREMELY DURABLE: Durable and Washable Pleated fabric that maintains strength even when loaded with sediment, our high flow core is designed to support the filter while providing industry leading flow rates while causing less wear and tear on your pump. POOL AND SPA FILTER CARTRIDGE REPLACEMENT: This Tier1 R173431 can be used in place of your Unicel C-4335 Spa filter. PLEATED FILTER DESIGN: Pleated filters maximize the contact between contaminants and filter media, allowing for greater capacity and contaminant reduction.