Compare: Boat hire in sydney harbour | Customer Ratings

  • MinnKota Deckhand 40 Electric Anchor Winch (40 Lbs. Capacity)
    Electric anchor winch makes fishing boat navigation and placement convenient and effortless Davit can be mounted horizontally to stop anchor swing Handles anchors up to 40 pounds; pre-spooled with 100 feet of 800-pound Test nylon rope Comes with mounting hardware and installation instructions; compatible with other Minn Kota accessories Two-year warranty included
  • The Boat Galley Handy VHF Reference - Quick Guide for All Boaters | Sailboats, Powerboats, Fishing Boats, Trawlers, Houseboats, Cruisers and Loopers
    COVERS ALL FREQUENTLY NEEDED TOPICS: Spelling Alphabet, Channel Usage, Emergency Calls, Safety Calls, Hi/Low Power Choice, Best Practices for Clear Communication, Radio Checks, Weather Radio, and Squelch EASY TO USE AT THE RADIO: Find answers to most-often asked questions without needing to open the guide; bright colors make it easy to locate; type sized for effortless reading CONVENIENT SIZE: Small enough to hold in one hand while holding the mic in the other; large enough to easily find and read; folds flat for easy storage near the radio QUICKLY FIND NEEDED INFO: Bright and clear headings make it a snap to find the desired section while on the radio LONG-LASTING: Ultra-tough waterproof material resists tearing and crumpling; no-glare coating resists discoloration from sunscreen, petroleum products and other chemicals; may be wiped clean when dirty
  • Scotty #310-BK Drink Holder with Bulkhead/Gunnel Mount (Black)
    Drink holder for cans, coffee mugs and insulated sleeves Convenient accessory rack to hang lures and tools Easily removable Includes #309 Bulkhead/Gunnel mount
  • Center Console, Boating, Fishing Boat, Pontoon, TriToon T-Shirt
    Boating on the Center Console, lake, river, inland waterways, gulf, fishing, motorboat, American Flag, 4th of July, Pontoon, Tri-Toon, Tritoon, Deck Boat, Run about Lake Life, River Rat, Deep Sea Fishing, Inland Fishing, Pontoon, Tri-Toon, TriToon, Runabout Lightweight, Classic fit, Double-needle sleeve and bottom hem
    16.99 $
  • Johnny Ray JR-500 Marine 1.25 by 3.5-Inch Push-Button Release Portable Sonar Swivel Mount, Black Finish
    Makes permanent mounts portable Compatible with most sonar and viewing devices Swivel design gives diverse viewing Molded Dupont nylon construction is strong and durable The button on the product is Dupont nylon which is the same material as the mount.
    38.95 $
  • Scotty #244L-BK Locking Flush Deck Mount w/ Rain Cap (Black)
    For all Scotty post mount rod holders Simply choose the best direction to fish from and insert the rod holder or accessory Easy instllation Made from quality materials Durable and long lasting
    12.99 $
  • Sun Company Lev-o-gage Heel-Angle Sailing Clinometer (Marine Model) | Mounts on Bulkhead of Boat
    IDEAL TILT READING - Monitors tilt from -45 to 45 degrees. Brass ball rides in special damping fluid for smooth, accurate readings. EASY TO READ DISPLAY - Brass ball instead of bubble included in bright Saturn yellow tube assembly. Engraved and hand painted numbers make for a functional, easy-to-read display. SHATTERPROOF DESIGN - Tube assembly is made out of a rugged copolymer "flex tube" for ultimate durability. Housing is constructed of durable ABS plastic. MOUNTS WITH 3M VHB TAPE - Lev-o-gage includes a piece of 3M VHB (Very-High Bond) tape on the back for easy mounting. Its convenient size will allow for mounting on almost any surface. MADE IN USA - From durable, high-quality materials.
    14.99 $
  • Scotty #1152 Coastlock Snap, Large, Stainless Steel, 2per Pack
    2 Large Stainless Steel Snaps with Barrel Swivel – 350 lb. test 3 Heavy Duty Connector Sleeves 3 Connector Sleeves
    9.39 $
  • Manufacturers' Select SurFit Legs for RV, Camper, Boat, Pontoon, Pedestal Legs from ITC Recessed Flush Mount Black - 27" Single Pack
    DESIGN: The SurFit Leg system is ITC's most economical Patented table leg solution. This non - mechanical locking system includes a fixed steel leg with capped ends, the table base and floor base both powder coated aluminum alloy for the silver option and high-performance polymer for the black option. The Floor base attaches with the included screws and the Table base attaches to your table with 6 screws that you supply to meet your tables requirement. EASY INSTALLATION: Leg is a simple pressure fit assembly. Attach the Table Base to the underside of your table with 6 screws, that you supply to meet your table's requirement, install the recessed base with the screws provided, then slide the leg into position and press down for a secure fit. If you do not have a recessed hole in your unit you can cut a 2.25" hole or look for the SurFit with Surface Mount Floor Base option. Also, EASY to REMOVE! APPLICATIONS: A single SurFit is perfect for smaller tables in an RV, Boat, Pontoon, Camper OR you can use it on your Deck or Dock - simply screw the base to your floor boards and you have a handy companion surface for grilling or a bar for an enjoyable outdoor cocktail party. This dinette table leg can also be used in a set of two for larger sized table tops. INCLUDES: Steel Leg with plastic end caps, Table Base and Recessed Floor Base (Aluminum for Silver leg and High-Performance Polymer for Black leg). 6 screws are included for the Floor Base only - you must source screws for the Table Base that work with your top (be sure not to screw through your table surface top). DETAILS: Floor bases are recessed into the floor of your unit, be sure your unit accepts this style or look for ITC's SurFit with Surface Mount option (making the base flush to the floor). DO NOT USE other manufacturer's or other ITC leg components with this leg system. ITC leg systems have been design to work only with their components and provide a stable support. Leg dimensions do not include your table top.
  • Sea-Dog 588010 Flush Mount Drink Holder, 3" Deep - Black
    Flush mount drink holder Injection molded ABS Requires 3" hole Color: Black