cruise

Book in advance: Boat rentals eleuthera | Technical sheet

  • TotalBoat Marine Gelcoat for Boat Building, Repair and Composite Coatings (White, Quart with Wax)
    PREMIUM MARINE-GRADE POLYESTER GELCOAT: More durable than standard orthophthalic gelcoat, this is the smart choice for cosmetic gelcoat repair, hull coatings, boat building, layups and exterior coatings for composite parts on boats, motorcycles, RVs & more IDEAL FOR COSMETIC REPAIRS, EASY TO TINT with a polyester resin or gelcoat coloring agent to color match your existing gelcoat; tint white gelcoat to get pastel colors; tint neutral gelcoat for dark, bold colors. Add colorants before adding MEKP catalyst EASY ONE-STEP APPLICATION USING A BRUSH, ROLLER OR SPRAY GUN: Non-sagging, high-viscosity formula is easy to apply and has great coverage. At 77°F, pot life is 8-12 minutes. Cured gelcoat is easy to sand, buff and polish to a high-gloss, showroom finish CHOOSE THE RIGHT GELCOAT FOR YOUR PROJECT: For polyester resin layups, use gelcoat without wax as the first coat inside a prepared mold; as a final coat, use gelcoat with wax (the wax makes the gelcoat dry tack-free); if needed, thin with styrene only AVAILABLE IN WHITE OR NEUTRAL, WITH OR WITHOUT WAX. White gelcoat comes in Quart and Gallon sizes; Neutral gelcoat comes in Quart size ONLY. Includes MEKP catalyst. Coverage: About 12.8 sq ft/gal at 1/8" thick, 25.7 sq ft at 1/16", 51.3 sq ft at 1/32"
  • Intex Explorer 300, 3-Person Inflatable Boat Set with French Oars and High Output Air-Pump
    Includes two 48" French oars Includes (1) high output manual pump 83" x 46" x 16" (211cm x 117cm x 41cm) Persons Capacity: 3 Weight Capacity: 410 lbs Welded on oar locks Grab rope on bow
  • Bimini Bay Outfitters Bimini Flats IV Bloodguard, Color: Blue Mist, Size: M (11700-BLMST-M)
    100% Polyester Mechanical Stretch Quick Dry with UPF Vented Cape Back with Barracks Two Flap Top Bellowed Pockets with Clipped Corners Two Hemostat Loops on Left Pocket Rod Loop with Bimini Bay Label included components: item
  • Intex Mariner 4, 4-Person Inflatable Boat Set with Aluminum Oars and High Output Air-Pump (Latest Model)
    The strong molecular structure of this plastic makes it highly resistant to damage from abrasion, impact and sunlight. Four Boston valves on main hull chamber for quick-fills and fast-deflations. The keel is inflatable; this results in improved control and handling. A durable rock guard lines the circumference of the hull above which an all-around nylon grab line circles the upper hull. Maximum weight capacity- 1100 pounds. Inflated Dimensions: 129" x 57" x 19" (328 x 145 x 48cm). The strong molecular structure of this plastic makes it highly resistant to damage from abrasion, impact and sunlight. Four Boston valves on main hull chamber for quick-fills and fast-deflations. The keel is inflatable; this results in improved control and handling. A durable rock guard lines the circumference of the hull above which an all-around nylon grab line circles the upper hull. Weight Capacity: 880 Lbs. (400 kg) - Inflated Dimensions: 129" x 57" x 19" (328 x 145 x 48cm).
    469.99 $
  • Meguiar's M4916 Marine/RV Heavy Duty Oxidation Remover, 16 Fluid Ounces
    MARINE CLEANER: Safely removes light to moderate oxidation, water spots, stains and scratches from gel coat, fiberglass and high-tech paint surfaces BRILLIANT SHINE: Enriched feeder oils restore color while adding and enhancing brilliant shine and gloss RESTORE COLOR: Restores the original color of older fiberglass gel coat surfaces by effectively removing surface degradation UNIQUE FORMULA: Unique diminishing abrasives break down and safely disappear during application, leaving the surface with a brilliant look and shine VERSATILE: Safe and effective by hand or by machine
    14.00 $
  • Intex Excursion 4, 4-Person Inflatable Boat Set with Aluminum Oars and High Output Air Pump (Latest Model)
    Rugged vinyl construction with inflatbale I-Beam floor for comfort and duribality All around grab line and handle on bow 2 fishing rod holders, gear pouch, inflatable seat cushions with backrest and oar holders included motor mount fittings attached 4 person boat with 1,100-pound weight limit.Maximum Weight Capacity: 725 pounds Rugged vinyl construction with inflatable I-Beam floor for comfort and durability All around grab line and handle on bow 2 fishing rod holders, gear pouch, inflatable seat cushions with backrest and oar holders included Motor mount fittings attached 4 person boat
    131.02 $ 149.99 $ -13%
  • TotalBoat TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Quart Kit)
    HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 2-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair
    61.99 $
  • TotalBoat Marine Wood Finish - Ideal for Boats, Home and Outdoor Teak Furniture (Satin, Quart)
    DURABLE, PROTECTIVE MARINE GRADE WOOD FINISH has a unique linseed oil & resin formula with maximum UV protection; use above the waterline to finish & seal teak, mahogany & other wood on your boat; prevents fading and UV damage; for interior and exterior use VERSATILE FINISH FOR WOOD is also ideal for DIY home use on outdoor teak furniture, front entry doors, patio chairs and tables, indoor wood stairs, handrails, trim and more; the flexible, breathable finish provides superior all-weather protection EASY TO APPLY, NO SANDING BETWEEN COATS: Apply 2-3 coats by brush or roller to clean, dry wood; covers easily and penetrates deeply to showcase the wood grain; easier than applying marine varnish because there's no need to sand between coats CHOOSE NATURAL TEAK, SATIN OR GLOSS FINISH: The natural teak finish is ideal for teak and other dark hardwoods; the gloss finish can be used alone or applied over the teak or satin finishes to get the look of varnish - without the extra effort and expense AVAILABLE IN QUART SIZE in Natural Teak, Gloss, or Satin; THINNING: Not necessary, but if desired, thin up to 50% with mineral spirits for the first coat; COVERAGE: 80-100 sq ft per quart; DRY TO OVERCOAT: 16 hrs @ 90°F; 24 hrs @ 70°F; 36 hrs @ 50°F
    34.99 $
  • TotalBoat Gleam Marine Spar Varnish, Gloss and Satin Polyurethane Finish for Wood, Boats and Outdoor Furniture (Satin Low-Sheen Gallon)
    CLASSIC MARINE VARNISH contains premium tung oil, phenolic resins and UV blockers for a beautiful, warm, transparent amber finish on all types of interior and exterior wood DURABLE SPAR VARNISH is the ideal outdoor wood sealer and finish for waterproof UV resistance on brightwork on boats, strip canoes, kayaks and outdoor wooden bar tops, garage doors, furniture and more EASY TO USE, SELF-LEVELING, DRIES FAST: Recoat in 1 hr. @ 72°F; apply up to 3 coats in 1 day; cured varnish remains flexible, expands and contracts with the wood during seasonal humidity and temperature changes CHOOSE GLOSS OR SATIN FINISH: For a high gloss varnish finish apply 4-6 coats of Gleam Gloss; for a sleek satin finish, build with coats of Gleam gloss varnish and use Gleam Satin for the final coats AVAILABLE IN GLOSS OR SATIN (low-sheen), in Pint, Quart and Gallon sizes. Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling); xylene (spraying). Coverage: 250 sq. ft./gallon
  • TotalBoat Lust Marine Varnish, High Gloss and Matte Finish for Wood, Boats, Outdoor Furniture (Matte, Quart)
    MARINE GRADE VARNISH imparts a rich, clear amber tone that enhances wood grain; creates a durable, uv resistant waterproof finish that won't fade; ideal for interior and exterior wood, brightwork on boats & outdoor furniture CLASSIC SPAR VARNISH WITH A MODERN FORMULA: High-build, fast-drying formula allows rapid recoating, multiple coats per day and no sanding between coats. Sand lightly before the final coat - be done in a little over 1 day DURABLE FLEXIBLE COATING: Premium, oil-based formula won't crack or peel when wood expands and contracts with changes in temperature; perfect for all types of marine and household woods CHOOSE HIGH GLOSS OR MATTE FINISH: For a high gloss varnish finish apply 6-8 coats of Lust Gloss; for a smooth satin finish, build with coats of Lust gloss varnish; use Lust Matte for the finish coats AVAILABLE IN HIGH GLOSS OR MATTE in Pint, Quart and Gallon sizes. Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling); xylene (spraying). Coverage: 360-400 sq. ft./gallon