electronics

Best service: Boat renting perth | Forums Ratings

  • CWB Connelly Boat Slide, Commercial Grade 5'7" Vinyl Slide Attach to Boat
    Commercial-grade reinforced Polymer construction Fits most recreational boats w/ a 27” maximum gunnel height FREE 12V air pump included 180 lbs. weight capacity - 67" L x 36” W x 18" H
  • TotalBoat Aluminum Boat Paint for Canoes, Bass Boats, Dinghies, Duck Boats, Jon Boats and Pontoons (White, Gallon)
    TOUGH MARINE PAINT: Durable, one-part polyurethane formula adheres directly to aluminum and galvanized metal. No need to etch or prime first; prevents corrosion and resists UV damage, chemicals and abrasion ATTRACTIVE LOW-SHEEN FINISH: Ideal for aluminum canoes, dinghies, pontoon, hunting, and fishing boats, jon boats, duck boats, hunting blinds, tree stands, ladders, boat trailers and more. Easy to create a camouflage finish for hunting EASY TO APPLY AND DRIES FAST: Apply 2-3 coats by brushing, rolling or spraying. Overcoat in just 1 hour at 72 F, without sanding between coats. Get superior adhesion to prepared aluminum without priming ENVIRONMENTALLY FRIENDLY ALUMINUM PAINT formula is chromate-free, has low VOCs, low odor, and easy soap & water cleanup. Thin up 20% with water. Finish won't peel, chip, or fade AVAILABLE IN EARTH BROWN, KHAKI, BLACK, WHITE, LIGHT GRAY AND ARMY GREEN (similar to olive drab green paint); Sizes: Quart and Gallon; Coverage: 80-100 sq ft/qt; 320-400 sq ft/gal; Use above or below the waterline (note: is not an antifouling paint)
  • Amarine Made 20" Boat Deck Plate Deck Hatch with Storage Bag for Boating Fishing Boat Marine Kayak
    You need a secure weatherproof and water-resistant hatch to store keys, wallet, phone, camera, snacks, etc. just in case you happened to roll the kayak, able to easily open the hatch with a simple twist and the lid stays attached. The storage bag is deep as well and easy to remove. Material:ABS+Nylon which has long working life,Rubber gasket protect hull from damage.The cover also help reduce UV damage to the hatch. Overall length:20 inch/51 cm;Overall width:11.5 inch/29.2 cm Easy installation: Find placement, cut hole, position, attach(Use the foam seal to trace the cut line. Then cut on the line with a electric grinder and a drywall bit.Place it on the lid and drop into the hull. Use the grinder again in each hole lightly to cut away the foam gasket in each screw hole. If you try and run the screw threw without the gasket hole it will tear and leak. Use a cordless screwdriver to start the screws then hand tighten so you don't strip the plastic hull. ) Perfect fit, all the screw holes matched and it closes perfectly.
  • Seamax Bimini Top Solution for Inflatable Boat, Fiberglass Boat & Aluminum Boat (Size B - L60 x W54-58 x H46, Black Bimini – Sunbrella Canopy)
    Seamax Bimini Top has built-in the aluminum eye-end fitting to install on standard oar lock pin (diameter is 10mm / 0.4 inch) of inflatable boat. Seamax aluminum eye-end fitting can turn 360‎°, it is rigid and more flexible comparing other types in the market. Seamax Bimini has 5 sizes to choose for different size boats and provide 2 different types of canopy fabric material, Polyester Pigment Fabric and Acrylic Solution-dyed fabric (Sunbrella). Polyester is economic type and we have it in gray color. Acrylic is 60% thicker and heavier, it can offer heavy duty using in outdoor and double life time. We have it in black color as high end solution. PVC Pontoon Fitting Patch Kit – Developed by Seamax, Great design for inflatable boat use. 180°+180° turns without dead angle. It is durable and flexible for Bimini top set up on the inflatable boat. Include: 2 Pontoon Fitting Patches with built in stainless steel base; Aluminum adaptor for eye-end fitting; Quick release pin & wind nut bolt; 100ml Glue. Hypalon version is available. Nylon Reinforced Deck Mount Kit – Good for using on aluminum boat and fiberglass boat, Create solid support for Bimini system. Include: 4 Bimini mounting stand with lock pin; 4 x C-mounts for straps tight down & Hardware. 70° mounting stand is available for inclined surface.
    260.00 $
  • Kwik-Tek F-5R Red Plastic Rope Floats 10-pack for Pools, Ski Ropes, Anchor Lines, Marker Buoys and Crab Traps
    Kwik-Tek F-5R Plastic Rope Floats These durable ultrasonically welded plastic floats are great for pools, ski ropes, anchor lines, marker buoys and crab traps Color: Red Size: 5 inches long x 3 inches diameter with a 1/2-inch hole in the center Sold as a 10-pack
    52.95 $
  • Five Oceans Marine Boat Mooring Line Rubber Snubbers, 1/2 inches Dia - 23-1/4 inches Length (Pair) FO-1400-M2-1
    MADE from High-Quality Super Elastic Rubber - Shock Absorber - (2 Pack) LENGHT of 23-1/4 inches (590mm) and Diameter of 1/2 inches (13mm) PROVIDE MAXIMUM protection against the stress caused by wind, waves, and wakes MOORING SNUBBERS prevent mooring line breakage along with compensating for sudden jolting and excessive stretching of lines beyond parting strength SUITABLE for Boats Up to 45FT. EASY Installation, no tools needed
    26.10 $
  • TotalBoat - 14308 Marine Gelcoat for Boat Building, Repair and Composite Coatings (White, Gallon with Wax)
    PREMIUM MARINE-GRADE POLYESTER GELCOAT: More durable than standard orthophthalic gelcoat, this is the smart choice for cosmetic gelcoat repair, hull coatings, boat building, layups and exterior coatings for composite parts on boats, motorcycles, RVs & more IDEAL FOR COSMETIC REPAIRS, EASY TO TINT with a polyester resin or gelcoat coloring agent to color match your existing gelcoat; tint white gelcoat to get pastel colors; tint neutral gelcoat for dark, bold colors. Add colorants before adding MEKP catalyst EASY ONE-STEP APPLICATION USING A BRUSH, ROLLER OR SPRAY GUN: Non-sagging, high-viscosity formula is easy to apply and has great coverage. At 77°F, pot life is 8-12 minutes. Cured gelcoat is easy to sand, buff and polish to a high-gloss, showroom finish CHOOSE THE RIGHT GELCOAT FOR YOUR PROJECT: For polyester resin layups, use gelcoat without wax as the first coat inside a prepared mold; as a final coat, use gelcoat with wax (the wax makes the gelcoat dry tack-free); if needed, thin with styrene only AVAILABLE IN WHITE OR NEUTRAL, WITH OR WITHOUT WAX. White gelcoat comes in Quart and Gallon sizes; Neutral gelcoat comes in Quart size ONLY. Includes MEKP catalyst. Coverage: About 12.8 sq ft/gal at 1/8" thick, 25.7 sq ft at 1/16", 51.3 sq ft at 1/32" Included components: Gelcoat, Hardener
    107.99 $
  • HARKEN Carbo Air Block | Premium Sailing and Sailboat Equipment
    Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming
    78.00 $
  • Extreme Max 3006.2159 BoatTector Solid Braid MFP Fender Line - 3/8" x 5', Blue
    Premium multifilament polypropylene (MFP) fender line Low stretch, minimal water absorption Lightweight and floatable Resistant to gas, oil, acids, mildew, and UV Stitched fender loop for quick, easy fender connection
  • HARKEN Carbo Air Block | Premium Sailing and Sailboat Equipment
    Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing