cruise

Best service: Boat renting montreal | Customer Evaluation

  • Rust-Oleum 207008 Marine Spar Varnish, Quart
    Ideal for use on exterior wood surfaces above the water line, including trim, railings and wood furniture Oil-based formula expands and contracts with changing weather conditions Dries to the touch in 2 hours and covers up to 150 sq. ft. Durable coating provides excellent resistance to UV, salt and mildew Crystal-clear varnish leaves a beautiful gloss finish with maximum protection UV resistant Salt and mildew resistant Expands and contracts with changing weather conditions Twice as durable as conventional wood finishes This item is not for sale in Catalina Island
  • Star Brite Waterproofing Spray, Waterproofer + Stain Repellent + UV Protection, 128 oz
    Waterproofing + UV & stain protection for boat covers, car covers, bimini tops, sail covers, tents, jackets, backpacks, boots, awnings & patio covers Does not change the breathabilty, color, or feel of fabric Great for use on new fabrics, greatly extending their service life by providing an additional barrier to moisture and damaging UV rays 1 Gallon - 465 square feet of coverage (Coverage may vary slightly depending upon amount of product applied per square foot) 22 oz covers – 80 square feet coverage (* Coverage may vary slightly depending upon amount of product applied per square foot) Made with pride in the United States NOTE: Star brite Waterproofing is ready to use at full strength for best results. If dilution is required, use mineral spirits. Cutting with denatured alcohol will cause clumping and adverse affects
  • TotalBoat Marine Gelcoat for Boat Building, Repair and Composite Coatings (White, Quart with Wax)
    PREMIUM MARINE-GRADE POLYESTER GELCOAT: More durable than standard orthophthalic gelcoat, this is the smart choice for cosmetic gelcoat repair, hull coatings, boat building, layups and exterior coatings for composite parts on boats, motorcycles, RVs & more IDEAL FOR COSMETIC REPAIRS, EASY TO TINT with a polyester resin or gelcoat coloring agent to color match your existing gelcoat; tint white gelcoat to get pastel colors; tint neutral gelcoat for dark, bold colors. Add colorants before adding MEKP catalyst EASY ONE-STEP APPLICATION USING A BRUSH, ROLLER OR SPRAY GUN: Non-sagging, high-viscosity formula is easy to apply and has great coverage. At 77°F, pot life is 8-12 minutes. Cured gelcoat is easy to sand, buff and polish to a high-gloss, showroom finish CHOOSE THE RIGHT GELCOAT FOR YOUR PROJECT: For polyester resin layups, use gelcoat without wax as the first coat inside a prepared mold; as a final coat, use gelcoat with wax (the wax makes the gelcoat dry tack-free); if needed, thin with styrene only AVAILABLE IN WHITE OR NEUTRAL, WITH OR WITHOUT WAX. White gelcoat comes in Quart and Gallon sizes; Neutral gelcoat comes in Quart size ONLY. Includes MEKP catalyst. Coverage: About 12.8 sq ft/gal at 1/8" thick, 25.7 sq ft at 1/16", 51.3 sq ft at 1/32"
  • TotalBoat Lust Marine Varnish, High Gloss and Matte Finish for Wood, Boats, Outdoor Furniture (High Gloss, Quart)
    MARINE GRADE VARNISH imparts a rich, clear amber tone that enhances wood grain; creates a durable, uv resistant waterproof finish that won't fade; ideal for interior and exterior wood, brightwork on boats & outdoor furniture CLASSIC SPAR VARNISH WITH A MODERN FORMULA: High-build, fast-drying formula allows rapid recoating, multiple coats per day and no sanding between coats. Sand lightly before the final coat - be done in a little over 1 day DURABLE FLEXIBLE COATING: Premium, oil-based formula won't crack or peel when wood expands and contracts with changes in temperature; perfect for all types of marine and household woods CHOOSE HIGH GLOSS OR MATTE FINISH: For a high gloss varnish finish apply 6-8 coats of Lust Gloss; for a smooth satin finish, build with coats of Lust gloss varnish; use Lust Matte for the finish coats AVAILABLE IN HIGH GLOSS OR MATTE in Pint, Quart and Gallon sizes. Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling); xylene (spraying). Coverage: 360-400 sq. ft./gallon
    39.99 $
  • TotalBoat Gleam Marine Spar Varnish, Gloss and Satin Polyurethane Finish for Wood, Boats and Outdoor Furniture (Clear Gloss Gallon)
    CLASSIC MARINE VARNISH contains premium tung oil, phenolic resins and UV blockers for a beautiful, warm, transparent amber finish on all types of interior and exterior wood DURABLE SPAR VARNISH is the ideal outdoor wood sealer and finish for waterproof UV resistance on brightwork on boats, strip canoes, kayaks and outdoor wooden bar tops, garage doors, furniture and more EASY TO USE, SELF-LEVELING, DRIES FAST: Recoat in 1 hr. @ 72°F; apply up to 3 coats in 1 day; cured varnish remains flexible, expands and contracts with the wood during seasonal humidity and temperature changes CHOOSE GLOSS OR SATIN FINISH: For a high gloss varnish finish apply 4-6 coats of Gleam Gloss; for a sleek satin finish, build with coats of Gleam gloss varnish and use Gleam Satin for the final coats AVAILABLE IN GLOSS OR SATIN (low-sheen), in Pint, Quart and Gallon sizes. Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling); xylene (spraying). Coverage: 250 sq. ft./gallon
    83.20 $ 97.99 $ -15%
  • Amarine Made Boat Out-Board Swim High Strength Fiberglass Platform with 2-Steps Ladder
    Maintenance free High Strength Fiberglass will not bleach, fade or crack Outboard Swim Platform with Telescoping Ladder Ladder and rail:stainless steel 304 Two-Step Telescoping Ladder
    124.80 $
  • TotalBoat-409304 Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Sea Foam, Quart)
    DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant, uv resistant finish with maximum color and gloss retention EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method); can also be applied by spraying; for use above the waterline SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean & resists staining; will not fade, crack, or peel; easy to touch up; ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces; not for continuous submersion on boat bottoms that remain in the water longer than 72 hours CHOOSE FROM 21 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals)
    38.99 $
  • TotalBoat Marine Wood Finish - Ideal for Boats, Home and Outdoor Teak Furniture (Satin, Quart)
    DURABLE, PROTECTIVE MARINE GRADE WOOD FINISH has a unique linseed oil & resin formula with maximum UV protection; use above the waterline to finish & seal teak, mahogany & other wood on your boat; prevents fading and UV damage; for interior and exterior use VERSATILE FINISH FOR WOOD is also ideal for DIY home use on outdoor teak furniture, front entry doors, patio chairs and tables, indoor wood stairs, handrails, trim and more; the flexible, breathable finish provides superior all-weather protection EASY TO APPLY, NO SANDING BETWEEN COATS: Apply 2-3 coats by brush or roller to clean, dry wood; covers easily and penetrates deeply to showcase the wood grain; easier than applying marine varnish because there's no need to sand between coats CHOOSE NATURAL TEAK, SATIN OR GLOSS FINISH: The natural teak finish is ideal for teak and other dark hardwoods; the gloss finish can be used alone or applied over the teak or satin finishes to get the look of varnish - without the extra effort and expense AVAILABLE IN QUART SIZE in Natural Teak, Gloss, or Satin; THINNING: Not necessary, but if desired, thin up to 50% with mineral spirits for the first coat; COVERAGE: 80-100 sq ft per quart; DRY TO OVERCOAT: 16 hrs @ 90°F; 24 hrs @ 70°F; 36 hrs @ 50°F
    34.99 $
  • TotalBoat Aluminum Boat Barrier Coat (Quart, Gray)
    High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with antifouling bottom paints or other 1- and 2-part paints Provides superior corrosion protection on all underwater metals Fast drying, with no sanding needed between coats For use above and below the waterline Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200
  • TotalBoat TotalProtect Epoxy Barrier Coat System (Gray, Quart)
    High-build two part epoxy primer and barrier coat for use above and below the waterline Excellent for gelcoat blister prevention and repair work on fiberglass boats Provides superior corrosion protection on all underwater metals Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat. Available in your choice of White or Gray in Quart or Gallon size kits. Coverage: 225 sq. ft. per gallon (at 7 mils wet, not accounting for waste)