by Tim P.

Jeanneau-5e903dc98f11b

  • WIWAV WDH-5ET-DC 10/100Mbps Unmanaged 5-Port Industrial Ethernet Switches with DIN Rail/Wall-Mount (UL Listed, Fanless, -30°C~75°C)
    COMPACT DESIGN - Industrial grade 5-port ethernet switch with 10/100Mbps automatic MDI/MDI-X crossover for plug-and-play. LOW POWER CONSUMPTION - Energy-Efficient Ethernet（Power Consumption <1 watts）, Wide range 12/24/36/48V DC terminal block input (No power supply, but DC-Jack Power Pigtail and Ground Cables are included). FAST DATA TRANSMISSION - Each port supports both 10/100Mbps speed auto negotiation, Supports IEEE 802.3, 802.3u, 802.3x standard. ROBUST AND RELIABLE - Can be used in extreme industrial environments, supports a wide range of operating temperatures -30°C ~ +75°C (-22F ~ 167F). Easy to use and DIN rail mountable with built-in bracket, Robust IP30-rated housing. SAFETY & ENVIRONMENTAL CERTIFICATION - WDH-5ET-DC has passed UL, cUL, CE, FCC, PSE, REACH (SVHC) and RoHS certifications. Low Power Consumption, Overload, Reverse connect protection. Safe and quality-reliable, so there’s no worries about damaging functional devices.
    49.98 $
  • diymore 5PCS 0.28" Digital Voltmeter Ammeter DC 100V 10A Amp Voltage Current Volt Amp Meter Tester 3 Bits Dual LED Display Panel(Red-Green)
    Voltage Measuring range: DC 0 - 100V Current Measuring range: DC 0 - 10A Display: 0.28" digital tube, Two color red and green Working voltage: DC 4-30V(The maximum input voltage can not exceed 30V. Otherwise the meter will be burned) Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement
    14.99 $
  • Logisys Corp. 4-Channel 12VDC Remote Control Relay Switch (RM04X)
    Switch Between Latch and Momentary Modes Keychain style handset water-resistant receiver remote can link onto your keychain for use with devices such as electronic blinds, PC lighting mods, indoor/outdoor lighting, garage doors etc.
    47.80 $
  • CZH-LABS DIN Rail Mount 12 Amp Solid State Relay SSR Module, in 4~32VDC, Out 100~240VAC. (4 Channels)
    MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated). Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode. Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes. Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative. DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers.
    53.00 $
  • Eletechsup 4 Channel DC 12V RS485 Relay Module Modbus RTU & at Command Remote Control Switch for PLC PTZ Camera Security Monitoring (1, 4 Channels)
    DC12V power supply 2：Standby current (all relays closed) 11-13MA, 1 relay open 44MA, 2 relays open 77MA, 3 relays open 110MA,4 relays open 140MA</p> 3: "open" "close" "Momentary" "Self-locking" "Interlock" "Delay" 6 Commands 4: Two instruction-control mode : AT command and MODBUS command 5: Under the AT command ,the maximum delay is 9999 seconds Under the MODBUS command ,the maximum delay is 255 seconds
    12.87 $
  • ASI X766846 CWRE7-0846 Pluggable SPDT Relay with DIN Rail Mount Terminal Block Base, 6 amp, 250 VAC Max Switching, 115 VAC/DC Coil
    Space-saving 6 mm wide terminal block base design Relay is pluggable for easy replacement Plug-in jumpers to easily connect common inputs and outputs Easy to follow wiring schematic on the base of the relay terminal block base LED status display and protection diodes
    19.91 $
  • Relay Module,DC 6-24V RS485 RS232 (TTL) RTU Control Module UART Relay Switch Board PLC Support for Modbus
    Support for: MODBUS and AT command, two command control modes The maximum delay is 9999 seconds under the AT command, and the maximum delay is 255 seconds for MODBUS command. The AT command can be input by the serial port super terminal (serial port assistant). Up to 247 devices can be supported for parallel use for MODBUS command mode. With RS485 and RS232 (TTL) dual bus interface.
    5.29 $ 8.79 $ -40%
  • AC 110V 1CH Relay Wireless Remote Control Switch 3 Transmitter + Receiver On/Off Adapter (433MHz)
    AC 110V 1CH Relay Wireless Remote
    12.59 $
  • CZH-LABS DIN Rail Mount 8 Amp Solid State Relay SSR Module, in 4~32VDC, Out 100~240VAC. (4 Channels)
    MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated). Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode. Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 8 Amp, maximum on-state current 12 Amp (< 10 seconds). Isolation: Phototriac. Zero cross: Yes. Terminal Block: Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass. DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers.
    37.00 $
  • IDEC Corporation RH2B-UAC24V Relay; E-Mech; Gen Purp; DPDT; Cur-Rtg 10A; Ctrl-V 24AC; Vol-Rtg 240/30AC/DC; Blade
    12.77 $

[rate]